How to make a SW/FW upgrade?

iiskra
Posts: 13
Joined: Wed Jun 10, 2015 8:03 pm

How to make a SW/FW upgrade?

Postby iiskra » Fri Jul 17, 2015 1:48 pm

1. Take a high quality USB key (Kingston, for example) and copy the selected files in the root directory:
- NK.bin - application software,
- ae33co502.hex, ae33de502.hex, ae33le502.hex, the three hex files (firmware).

2. Switch on the AE33 and stop measurement.

3. Insert the USB key into the front USB slot. Wait 10 seconds.

4. Go to "Operation/Advanced" menu and press the "Update" button.

5. Choose "Software" upgrade.

6. Wait until the Aethalometer finishes the upgrade.

7. Take the USB key out of the Aethalometer.

8. Restart the Aethalometer.

9. Switch on the AE33 and stop measurement.

11. Insert the USB key into the front USB slot. Wait 10 seconds.

12. Go to "Operation/Advanced" menu and press the "Update" button.

13. Choose "Firmware" upgrade.

14. Wait until the Aethalometer finishes the upgrade. This can take up to 10 min!

15. Take the USB key out of the Aethalometer.

16. Restart the Aethalometer.

17. Instrument will install the update during the startup, it will automatically restart again

18. Check the "Advanced" menu for the software application and firmware versions.

Return to “AE33 - Software updates”

Who is online

Users browsing this forum: No registered users and 1 guest